soft starter for asynchronous motor, Altistart 22, control 110V, 208 to 575V, 60 to 200hp
ATS22C21S6U
Range of Product | Altistart 22 |
---|---|
Product or Component Type | Soft starter |
product destination | Asynchronous motors |
Product Specific Application | Pumps and fans |
Component name | ATS22 |
Phase | 3 phase |
[Us] rated supply voltage | 208…600 V – 15…10 % |
Maximum Horse Power Rating | 150 hp 460 V 200 hp 575 V 60 hp 208 V 75 hp 230 V |
Factory setting current | 180 A |
Power dissipation in W | 117 W for standard applications |
Utilisation category | AC-53A |
Type of start | Start with torque control (current limited to 3.5 In) |
IcL starter rating | 210 A connection in the motor supply line for standard applications |
IP Degree of Protection | IP00 |
Assembly style | With heat sink |
---|---|
Function Available | Internal bypass |
Supply voltage limits | 177…660 V |
Supply frequency | 50…60 Hz – 10…10 % |
Network Frequency | 45…66 Hz |
Device connection | In the motor supply line |
[Uc] control circuit voltage | 110 V – 15…10 % 50/60 Hz |
Control circuit consumption | 20 W |
Discrete output number | 2 |
Discrete output type | Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O |
Minimum switching current | 100 mA 12 V DC relay outputs) |
Maximum switching current | 5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs |
Discrete input number | 3 |
Discrete input type | LI1, LI2, LI3) logic, 5 mA 20 kOhm |
Discrete input voltage | 110 V <= 121 V |
Discrete input logic | Positive logic LI1, LI2, LI3 < 20 V <= 15 mA > 79 V, <= 2 mA |
Output current | 0.4…1 Icl adjustable |
PTC probe input | 750 Ohm |
Communication Port Protocol | Modbus |
Connector Type | 1 RJ45 |
Communication data link | Serial |
Physical interface | RS485 multidrop |
Transmission Rate | 4800, 9600 or 19200 bps |
Installed device | 31 |
Protection type | Phase failure line Thermal protection motor Thermal protection starter |
marking | CE |
Type of cooling | Forced convection |
Operating position | Vertical +/- 10 degree |
Height | 16.7 in (425 mm) |
Width | 8.1 in (206 mm) |
Depth | 11.8 in (299 mm) |
Net Weight | 72.8 lb(US) (33 kg) |
Electromagnetic compatibility | Conducted and radiated emissions level A IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/current impulse level 3 IEC 61000-4-5 |
---|---|
Standards | EN/IEC 60947-4-2 |
Product Certifications | CSA UL CCC C-tick GOST |
Vibration resistance | 1 gn 13…200 Hz)EN/IEC 60068-2-6 1.5 mm 2…13 Hz)EN/IEC 60068-2-6 |
Shock resistance | 15 gn 11 ms EN/IEC 60068-2-27 |
Noise level | 56 dB |
Pollution degree | Level 2 IEC 60664-1 |
Relative humidity | 0…95 % without condensation or dripping water EN/IEC 60068-2-3 |
Ambient air temperature for operation | 14.0000000000…104.0000000000 °F (-10…40 °C) without derating) 104.0000000000…140.0000000000 °F (40…60 °C) with current derating 2.2 % per °C) |
Ambient Air Temperature for Storage | -13.0000000000…158.0000000000 °F (-25…70 °C) |
Operating altitude | <= 3280.84 ft (1000 m) without derating > 3280.84…< 6561.68 ft (> 1000…< 2000 m) with current derating of 2.2 % per additional 100 m |
Category | US1CP1G22576 |
---|---|
Discount Schedule | CP1G |
GTIN | 3606480211195 |
Returnability | Yes |
Country of origin | US |
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 20.9 in (53.0 cm) |
Package 1 Width | 14.6 in (37.0 cm) |
Package 1 Length | 22.05 in (56.0 cm) |
Package 1 Weight | 55.1 lb(US) (25.0 kg) |
Warranty | 18 months |
---|
There are no reviews yet.